Snow Performance Inc.
Items 1 - 40 of 110
In stock
Nylon-Pressure Line, black, prm
In stock
The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line.
High quality screw-in adapter for water injection nozzles.
Secure hold in rubber and silicone pressure hoses as well as in aluminum pressure pipes without welding!
NOT AVAILABLE UNTIL FURTHER NOTICE. Replacement: Item no. SP30113
Secure hold in rubber and silicone pressure hoses as well as in aluminum pressure pipes without welding!
NOT AVAILABLE UNTIL FURTHER NOTICE. Replacement: Item no. SP30113
In stock
Boost Cooler Hyper-Sonic Injector, 250ml/min@100psi, including fine mesh filter.
Replaces Art.No. SP30305 (Size 4/225ml)
Replaces Art.No. SP30305 (Size 4/225ml)
In stock
FEP-Pressure Line, prm
In stock
Nylon-Pressure Line, red, prm
In stock
Boost Cooler Hyper-Sonic Injector, 125ml/min@100psi, including fine mesh filter.
Replaces Art.No. SP30302 (Size 2/100ml)
Replaces Art.No. SP30302 (Size 2/100ml)
In stock
1/8" Fitting for 1/4" Boost Cooler Water-Methanol Pressure Line with new Clamping Ring Connection.
In stock
For all 1/4" Boost Cooler and compatible systems.
In stock
Boost Cooler Hyper-Sonic Injector, 375ml/min@100psi, including fine mesh filter.
Replaces Art.No. SP30305 (Size 5/375ml)
Replaces Art.No. SP30305 (Size 5/375ml)
In stock
Protection for your Water Injection pressure line.
In stock
Boost Cooler Hyper-Sonic Injector, 60ml/min@100psi, including fine mesh filter.
Replaces Art.No. SP30301 (Size 1/60ml)
Replaces Art.No. SP30301 (Size 1/60ml)
In stock
Boost Cooler Hyper-Sonic Injector, 190ml/min@100psi, including fine mesh filter.
Replaces Art.No. SP30305 (Size 5/375ml)
Replaces Art.No. SP30305 (Size 5/375ml)
In stock
*** OUR TOP SELLER! ***
The latest development from SNOW Performance!
Complete Water-Methanol Injection Kit with freely programmable 52mm OLED-Gauge.
Integrated System Monitoring and Display of Boost Pressure, Fill Level and Injection Quantity. Upgradable to Dual Stage Technology.
Fits to all Turbo-/supercharged Engines up to 3.5bar boost.
In stock
Weldable threaded nozzle adapter make installing your water meth nozzle easier and more secured when using thin-walled aluminium intake tubing.
In stock
Boost Cooler Hyper-Sonic Injector, 500ml/min@100psi, including fine mesh filter.
In stock
Ultimate security for your engine! - The solenoid valve is controlled by the pump in parallel with the controller and opens up the line to the injector only when the injection is enabled.
In stock
Boost Cooler Hyper-Sonic Injector, 630ml/min@100psi, including fine mesh filter.
Replaces Art.No. SP30306 (Size 6/625ml)
Replaces Art.No. SP30306 (Size 6/625ml)
In stock
Highly Efficient and easty to use 1/4" T-connector with EPDM seals.
Top
With this complete kit, you get everything you need for a professional Boost Cooler Water Methanol Injection installation in the Trunk of the Vehicle!
In stock
Boost Cooler Hyper-Sonic Injector, 1000ml/min@100psi, including fine mesh filter.
In stock
Boost Cooler Hyper-Sonic Injector, 750ml/min@100psi, including fine mesh filter.
In stock
Adapter from 1/8 "-NPT thread to Dash 4 (4AN) for Boost Cooler ProLine Stainless Steel Braided Hose.
In stock
SNOW Performance universal tank connection with clamping ring connection for our 1/4" Boost Cooler pressure line.
In stock
Electronically controlled water/alcohol injection incl. LCD display and 20 bar pump system!
The Stage 2 Boost Cooler progressively injects more or less water or water/alcohol, according to manifold boost pressure (MAP sensor included). The system can be set in seconds using the LCD programming unit supplied.
For all turbo/compressor engines up to 2.1 bar boost pressure.
The Stage 2 Boost Cooler progressively injects more or less water or water/alcohol, according to manifold boost pressure (MAP sensor included). The system can be set in seconds using the LCD programming unit supplied.
For all turbo/compressor engines up to 2.1 bar boost pressure.
In stock
The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine steel braided lines.
In stock
High Quality Steel Braided Line (4.5m) with Dash 4 Fittings for Boost Cooler ProLine series.
In stock
High Quality Steel Braided Line (30cm) with Dash 4 Fittings for Boost Cooler ProLine series.
*** NEW! - ProLine Version ***
The latest development from SNOW Performance!
Complete Water-Methanol Injection Kit with freely programmable 52mm OLED-Gauge and ProLine steel flex lines.
Integrated System Monitoring and Display of Boost Pressure, Fill Level and Injection Quantity. Upgradable to Dual Stage Technology.
Fits to all Turbo-/supercharged Engines up to 3.5bar boost.
In stock
For all Boost Cooler Water Methanol Injection kits of the ProLine Series.
In stock
Boost Cooler Hyper-Sonic Injector, 30ml/min@100psi, including fine mesh filter.
In stock
300PSI UHO High Pressure Diaphragm Pump, Extreme Environment, 1/4" Quick Connect - GEN 4.
In stock
High Quality Steel Braided Line (60cm) with Dash 4 Fittings for Boost Cooler ProLine series.
In stock
3/8" Fitting for 1/4" Boost Cooler Water-Methanol Pressure Line with new Clamping Ring Connection.
In stock
SNOW Performance inline water-methanol filter for additional system protection.
In stock
Boost Cooler Stage 2 VC-50 POWER-MAX Upgrade.
In stock
300PSI UHO High Pressure Diaphragm Pump, Extreme Environment, GEN 4.- ProLine Series.
In stock
Boost Cooler Hyper-Sonic Injector, 45ml/min@100psi, including fine mesh filter.
In stock
The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line.
In stock
Adapter from 3/8 "-NPT thread to Dash 4 (4AN) for Boost Cooler ProLine Stainless Steel Braided Hose.
Items 1 - 40 of 110