Boost Cooler Water Injection Nozzle - Size 8
Flow Rate 500ml/min (8.0 GPH) @ 100psi
The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology.
Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy.
The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water.
- 2-chamber nozzle, Venturi-Design
- Nominal Flow Rate: ~ 500ml/min / 8.0 GPH
- Material: Stainless steel with zinc plating
- 80µ (micron) fine mesh filter
- Outer Thread: 1/8"NPT27
- 100% Methanol resistant
Note: To use our nozzles, you need our Boost Cooler nozzle holder. The nominal flow data relate to 100 psi pump pressure.